#include "system.h"
#include "app_client.h"
#include "hal_ble_client.h"
#include "hal_ble_host.h"
#include "bsp_time.h"
#include "hal_led.h"
#include "ble_gap.h"
#include "app_host.h"
#include "app_flash.h"
#include "app_client_step.h"
#include "app_client_infomation.h"
#include "app_client_dataupdate.h"

 //>> 0xA1: 查询
void cb_BLE_Client_R_UPDATE(void* handle)
{
	BLE_Client_Rx_t *target = handle;
	uint8_t _cmd = target->pDat[0];
	switch(_cmd){
		case BLE_Client_R_UPDATE_BASEINFO:{
			//>> 0(设备基本信息): 开始时间ms(8)
			//<< 0(子命令): 设备型号(64)+左鞋蓝牙地址(6)+硬件版本(2)+软件版本(2)+右鞋蓝牙地址(6)+硬件版本(6)+软件版本(2)
			//>> AA 06 F9 A1 00 4A
			//<< AA 55 AA A1 00 53 4D 41 52 54 20 53 48 4F 45 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 C1 EB D0 E3 87 47 01 00 01 00 00 00 00 00 00 4F
			if(mFlash.isHost)
				  app_host_GetClientInfo(); //申请设备基本信息
		  else
				  app_client_infomation_Send();
			break;}
		case BLE_Client_R_UPDATE_DATA:{
			//>> 1(设备数据)
			//<< 1(子命令): 左鞋电量(1)+左鞋温度(1)+左鞋压力(4)+左鞋步数(4)+右鞋电量(1)+右鞋温度(1)+右鞋压力(4)+右鞋步数(4)
			if(mFlash.isHost)
				app_host_GetClientData(20);
			else
				app_client_DataUpdate_Send();
			break;}
		case BLE_Client_R_UPDATE_STEPNUM:{
			//>> 2(查询步数): 包序号[0全部](2)
			//<< 2(查询步数): +开始时间ms(8)+包的数量(2)+包序号(2)+每小时步数(4)+...
			app_client_SendStep(target);
			break;}
		case BLE_Client_R_UPDATE_STEPNUM_CLERA:{
			//>> 3(删除步数): 开始时间ms(8)+距离上一个整点的分钟数(1)
			//<< 3(删除步数): 开始时间ms(8)+距离上一个整点的分钟数(1)
			BLE_Client_Tx_Send(0,BLE_UPDATE,target->pDat,target->datLen);
			app_client_DeleteStep(target);
			break;}
		default:break;
	}
}

void app_client_Initialize(void)
{
	BLE_Client_Rx_Regist(BLE_UPDATE,cb_BLE_Client_R_UPDATE);
	app_client_step_Initialize();
}