/** * Copyright (c) 2012 - 2020, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @file * * @defgroup ble_dfu Buttonless DFU Service * @{ * @ingroup ble_sdk_srv * @brief Buttonless DFU Service module. * * @details This module implements a proprietary Buttonless Secure DFU Service. The service can * be configured to support bonds or not. The bond support configuration must correspond to the * requirement of Secure DFU bootloader. * * @note Attention! * To maintain compliance with Nordic Semiconductor ASA Bluetooth profile * qualification listings, this section of source code must not be modified. */ #ifndef BLE_DFU_H__ #define BLE_DFU_H__ #include #include "ble_srv_common.h" #include "nrf_sdh_ble.h" #ifdef __cplusplus extern "C" { #endif /**@brief SoC observer priority. * @details Priority of this module's SoC event handler. */ #define BLE_DFU_SOC_OBSERVER_PRIO 1 #define BLE_DFU_BUTTONLESS_CHAR_UUID (0x0003) /**< Value combined with vendor-specific base to create Unbonded Buttonless characteristic UUID. */ #define BLE_DFU_BUTTONLESS_BONDED_CHAR_UUID (0x0004) /**< Value combined with vendor-specific base to create Bonded Buttonless characteristic UUID. */ /**@brief Nordic vendor-specific base UUID. */ #define BLE_NORDIC_VENDOR_BASE_UUID \ {{ \ 0x50, 0xEA, 0xDA, 0x30, 0x88, 0x83, 0xB8, 0x9F, \ 0x60, 0x4F, 0x15, 0xF3, 0x00, 0x00, 0xC9, 0x8E \ }} /**@brief Nordic Buttonless DFU Service event type . */ typedef enum { BLE_DFU_EVT_BOOTLOADER_ENTER_PREPARE, /**< Event indicating that the device is preparing to enter bootloader.*/ BLE_DFU_EVT_BOOTLOADER_ENTER, /**< Event indicating that the bootloader will be entered after return of this event.*/ BLE_DFU_EVT_BOOTLOADER_ENTER_FAILED, /**< Failure to enter bootloader mode.*/ BLE_DFU_EVT_RESPONSE_SEND_ERROR, /**< Failure to send response.*/ } ble_dfu_buttonless_evt_type_t; /**@brief Nordic Buttonless DFU Service event handler type. */ typedef void (*ble_dfu_buttonless_evt_handler_t) (ble_dfu_buttonless_evt_type_t p_evt); /**@brief Enumeration of Bootloader DFU response codes. */ typedef enum { DFU_RSP_INVALID = 0x00, /**< Invalid op code. */ DFU_RSP_SUCCESS = 0x01, /**< Success. */ DFU_RSP_OP_CODE_NOT_SUPPORTED = 0x02, /**< Op code not supported. */ DFU_RSP_OPERATION_FAILED = 0x04, /**< Operation failed. */ DFU_RSP_ADV_NAME_INVALID = 0x05, /**< Requested advertisement name is too short or too long. */ DFU_RSP_BUSY = 0x06, /**< Ongoing async operation. */ DFU_RSP_NOT_BONDED = 0x07, /**< Buttonless unavailable due to device not bonded. */ } ble_dfu_buttonless_rsp_code_t; /**@brief Enumeration of Bootloader DFU Operation codes. */ typedef enum { DFU_OP_RESERVED = 0x00, /**< Reserved for future use. */ DFU_OP_ENTER_BOOTLOADER = 0x01, /**< Enter bootloader. */ DFU_OP_SET_ADV_NAME = 0x02, /**< Set advertisement name to use in DFU mode. */ // DFU_OP_ClEARFlash_ENTER_BOOTLOADER = 0x03, /**< Clear flash Enter bootloader. */ DFU_OP_RESPONSE_CODE = 0x20 /**< Response code. */ } ble_dfu_buttonless_op_code_t; /**@brief Type holding memory used by Secure DFU Buttonless Service. */ typedef struct { uint8_t uuid_type; /**< UUID type for DFU UUID. */ uint16_t service_handle; /**< Service Handle of DFU (as provided by the SoftDevice). */ uint16_t conn_handle; /**< Connection handle for the current peer. */ ble_gatts_char_handles_t control_point_char; /**< Handles related to the DFU Control Point characteristic. */ uint32_t peers_count; /**< Counter to see how many persistently stored peers must be updated for Service Changed indication. This value will be counted down when comparing write requests. */ ble_dfu_buttonless_evt_handler_t evt_handler; /**< Event handler that is called upon Buttonless DFU events. See @ref ble_dfu_buttonless_evt_type_t. */ bool is_waiting_for_reset; /**< Flag indicating that the device will enter bootloader. */ bool is_waiting_for_svci; /**< Flag indicating that the device is waiting for async SVCI operation */ } ble_dfu_buttonless_t; /**@brief Type used to initialize the Secure DFU Buttonless Service. */ typedef struct { ble_dfu_buttonless_evt_handler_t evt_handler; /**< Bootloader event handler. */ } ble_dfu_buttonless_init_t; /**@brief Function for initializing the Device Firmware Update module. * * @param[in] p_dfu_init Structure containing the values of characteristics needed by the * service. * @retval NRF_SUCCESS on successful initialization of the service. */ uint32_t ble_dfu_buttonless_init(const ble_dfu_buttonless_init_t * p_dfu_init); /**@brief Function for initializing the async SVCI interface. * * @warning Ensure that no interrupts are triggered when calling this functions as * interrupts and exceptions are forwarded to the bootloader for the period * of the call and may be lost. * * @details This configures the async interface for calling to the * bootloader through SVCI interface. * * @retval NRF_SUCCESS on success, otherwise an error code. */ uint32_t ble_dfu_buttonless_async_svci_init(void); /**@brief Function to initialize the backend Secure DFU Buttonless service which is either * supports bonds or not. * * @note Do not call this function directly. It is called internally by @ref ble_dfu_buttonless_init. * * @param[in] p_dfu Nordic DFU Service structure. * * @return NRF_SUCCESS On sucessfully initializing, otherwise an error code. */ uint32_t ble_dfu_buttonless_backend_init(ble_dfu_buttonless_t * p_dfu); /**@brief Function for adding the buttonless characteristic. * * @note This will be implemented differently on bonded/unbonded Buttonless DFU service. * * @param[in] p_dfu Nordic DFU Service structure. * * @return NRF_SUCCESS on success, otherwise an error code. */ uint32_t ble_dfu_buttonless_char_add(ble_dfu_buttonless_t * p_dfu); /**@brief Function for sending a response back to the client. * * @param[in] op_code Operation code to send the response for. * @param[in] rsp_code Response code for the operation. * * @retval NRF_SUCCESS on success, otherwise an error code. */ uint32_t ble_dfu_buttonless_resp_send(ble_dfu_buttonless_op_code_t op_code, ble_dfu_buttonless_rsp_code_t rsp_code); /**@brief Function for handling the application's BLE stack events. * * @details Handles all events from the BLE stack of interest to the DFU buttonless service. * * @param[in] p_ble_evt Event received from the BLE stack. * @param[in] p_context BLE context structure. */ void ble_dfu_buttonless_on_ble_evt(ble_evt_t const * p_ble_evt, void * p_context); /**@brief Function for handling control point write requests. * * @details Handles write requests to the control point in * DFU with bonds or without bonds. * * @param[in] p_evt_write GATTS write event. */ void ble_dfu_buttonless_on_ctrl_pt_write(ble_gatts_evt_write_t const * p_evt_write); /**@brief Function for preparing to enter the bootloader. * * @warning This function is called directly. (It is called internally). * * @retval Any error code from calling @ref sd_ble_gap_disconnect. */ uint32_t ble_dfu_buttonless_bootloader_start_prepare(void); /**@brief Function for finalizing entering the bootloader. * * @warning This function is not to be called. (It is called internally). * * @retval NRF_SUCCESS Finalize was started correctly. */ uint32_t ble_dfu_buttonless_bootloader_start_finalize(void); void bsp_ble_dfu_process_Initialize(void); #ifdef __cplusplus } #endif #endif // BLE_DIS_H__ /** @} */