shoe_mcu/app/app_wireless_pair.c

/*Includes ----------------------------------------------*/
#include "tool.h"
#include "nrf_delay.h"
#include "system.h"
#include "ble_comm.h"
#include "bsp_time.h"
#include "hal_led.h"
#include "app_flash.h"
#include "app_wireless_pair.h"

/*Private macro ------------------------------------------------------------------------------------------------------------------------------------*/
#define				APP_WIRELESS_PAIR_FSMTABLE_LEN															8																			//状态表长度													
#define				APP_WIRELESS_PAIR_RSSI_THRESHOLD														-18																		//rssi阈值

/*Struction ------------------------------------------------------------------------------------------------------------------------------------*/
//定义状态数据的枚举类型
typedef enum _app_wireless_pair_state
{
	APP_WIRELESS_PAIR_STATE_PAIRING_STANDBY,																																			//配对待机状态
	APP_WIRELESS_PAIR_STATE_PAIRING_PREPARATION,																																	//配对准备中状态
	APP_WIRELESS_PAIR_STATE_PAIRING_IN_PROGRESS,																																	//配对进行中状态
	APP_WIRELESS_PAIR_STATE_END_OF_PAIRING,																																				//配对结束状态
}App_Wireless_Pair_State_e;
//定义状态表的数据类型
typedef struct _app_wireless_pair_fsmtable_s
{
	App_Wireless_Pair_Event_e												event;																												//事件
	App_Wireless_Pair_State_e												CurState;																											//当前状态
	int																							(*eventActFun)();																							//函数指针
	App_Wireless_Pair_State_e												NextState;																										//下一个状态
}App_Wireless_Pair_fsmtable_s;
//定义状态机类型
typedef struct _app_wireless_pair_fsm_s
{
	App_Wireless_Pair_State_e												curState;																											//当前状态
	App_Wireless_Pair_fsmtable_s										FsmTable[APP_WIRELESS_PAIR_FSMTABLE_LEN];											//状态表
	App_Wireless_Pair_Set_Scan_Cb										set_scan_cb;																									//设置扫描回调
	App_Wireless_Pair_Set_Adv_Cb										set_adv_cb;																										//设置广播回调
	uint8_t																					peer_addr[6];																									//对端MAC地址
	bool																						is_busy;																											//是否忙碌
	uint8_t																					led_display_count;																						//亮灯次数
	uint8_t																					led_switch;																										//灯的开关
	char 																						already_scan_or_adv_mac_buf[16];															//已经在扫描或广播的mac地址
}App_Wireless_Pair_Fsm_s;
/*Local Variable ------------------------------------------------------------------------------------------------------------------------------------*/
static App_Wireless_Pair_Fsm_s ob_app_wireless_pair_fsm;

/*Local Functions ------------------------------------------------------------------------------------------------------------------------------------*/
static int app_wireless_pair_set_scan_adv_on(void)
{
	int ret = 0;
	
	//若是右鞋则进入主动扫描状态
	//若是左鞋则设置扫描回应为MAC地址状态
	if(mFlash.isHost)
	{
		advertising_stop();
		nrf_ble_scan_stop();
		host_disconnect();
		if(host_isconnect() == 0)
		{
			if(ob_app_wireless_pair_fsm.set_adv_cb != NULL)ret = ob_app_wireless_pair_fsm.set_adv_cb(0x01);
			else ret = -1;
			if(ob_app_wireless_pair_fsm.set_scan_cb != NULL)ret = ob_app_wireless_pair_fsm.set_scan_cb(0x00);
			else ret = -1;
		}
		else
		{
			ret = -1;
		}
	}
	else
	{
		advertising_stop();
		nrf_ble_scan_stop();
		slave_disconnect();
		if(slave_isconnect() == 0)
		{
			if(ob_app_wireless_pair_fsm.set_adv_cb != NULL)ret = ob_app_wireless_pair_fsm.set_adv_cb(0x00);
			else ret = -1;
			if(ob_app_wireless_pair_fsm.set_scan_cb != NULL)ret = ob_app_wireless_pair_fsm.set_scan_cb(0x01);
			else ret = -1;
		}
		else
		{
			ret = -1;
		}
	}
	
	return ret;
}
static int app_wireless_pair_set_scan_adv_off(void)
{
	int 			ret = 0;
	char 			buf[16];
	
	//若是右鞋则进入被动扫描状态
	//若是左鞋则设置扫描回应为空数据状态
	if(mFlash.isHost)
	{
		advertising_stop();
		nrf_ble_scan_stop();
		host_disconnect();
		if(host_isconnect() == 0)
		{
			if(ob_app_wireless_pair_fsm.set_adv_cb != NULL)ret = ob_app_wireless_pair_fsm.set_adv_cb(0x00);
			else ret = -1;
			if(ob_app_wireless_pair_fsm.set_scan_cb != NULL)
			{
				sprintf(buf,"%02X%02X%02X%02X%02X%02X",mFlash.macHost[0],mFlash.macHost[1],mFlash.macHost[2],mFlash.mClient.macAddr[3],mFlash.mClient.macAddr[4],mFlash.mClient.macAddr[5]);
				host_set_scan_name(buf,strlen(buf));
				ret = ob_app_wireless_pair_fsm.set_scan_cb(0x00);
			}
			else ret = -1;
		}
		else
		{
			ret = -1;
		}
	}
	else
	{
		advertising_stop();
		nrf_ble_scan_stop();
		slave_disconnect();
		if(slave_isconnect() == 0)
		{
			if(ob_app_wireless_pair_fsm.set_adv_cb != NULL)
			{
				sprintf(buf,"%02X%02X%02X%02X%02X%02X",mFlash.mClient.macAddr[0],mFlash.mClient.macAddr[1],mFlash.mClient.macAddr[2],mFlash.macHost[3],mFlash.macHost[4],mFlash.macHost[5]);
				slave_set_adv_name(buf,strlen(buf));
				slave_adv_init();
				ret = ob_app_wireless_pair_fsm.set_adv_cb(0x00);
			}
			else ret = -1;
		}
		else
		{
			ret = -1;
		}
	}
	
	return ret;
}
static int app_wireless_pair_unconditional_entry(void)
{
	return 0;	//不用做任何操作，直接进入下一个状态
}

static void Bubble_sort(int arr[], int size)
{
	int j,i,tem;
	for (i = 0; i < size-1;i ++)//size-1是因为不用与自己比较，所以比的数就少一个
	{
		int count = 0;
		for (j = 0; j < size-1 - i; j++)	//size-1-i是因为每一趟就会少一个数比较
		{
			if (arr[j] > arr[j+1])//这是升序排法，前一个数和后一个数比较，如果前数大则与后一个数换位置
			{
				tem = arr[j];
				arr[j] = arr[j+1];
				arr[j+1] = tem;
				count = 1;
				
			}
		}
		if (count == 0)			//如果某一趟没有交换位置，则说明已经排好序，直接退出循环
				break;	
		
		//值得注意的是函数中的定义的count是为了检验是否进行了元素的交换，是对代码的一种优化
	}
}

static int app_wireless_pair_enter_in_process(int rssi, uint8_t *addr)
{
	#define	N	15
	
	static int 			rssi_buf[N], rssi_filter_buf[N];
	static uint8_t	index = 0;
	int 						ret = 0;
	uint8_t 				null_addr[6] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};

	if(ob_app_wireless_pair_fsm.is_busy == false)
	{
		rssi_buf[index++] = rssi;
		if(index == N)index = 0;
		memcpy(rssi_filter_buf,rssi_buf,sizeof(rssi_buf));
		Bubble_sort(rssi_filter_buf, N);
		
//		SEGGER_RTT_printf(0,"rssi:%d,st:%d,curState:%d,active:%d\r\n",rssi_filter_buf[N-1],NRF_RTC0->COUNTER, \
//																																										 ob_app_wireless_pair_fsm.curState,wireless_pair_scan_get_active());
		
		if(rssi_filter_buf[N-1] >= APP_WIRELESS_PAIR_RSSI_THRESHOLD)
		{
			if(memcmp(addr,null_addr,6) != 0)
			{
				ret = app_wireless_pair_EventHandle(APP_WIRELESS_PAIR_EVENT_RSSI_MEETS_REQUIREMENTS);
				
				for(int i=0; i<6; i++)ob_app_wireless_pair_fsm.peer_addr[i] = addr[5-i];
			}
			else
			{
				ret = app_wireless_pair_EventHandle(APP_WIRELESS_PAIR_EVENT_RSSI_DOES_NOT_MEETS_REQUIREMENTS);
			}
		}
		else
		{
			ret = app_wireless_pair_EventHandle(APP_WIRELESS_PAIR_EVENT_RSSI_DOES_NOT_MEETS_REQUIREMENTS);
		}
	}
	
	return ret;
}

static void display_led_process(void)
{
	ob_app_wireless_pair_fsm.led_display_count++;
	if (ob_app_wireless_pair_fsm.led_display_count % 2 == 0)
	{
			LED_Start(LED_PAIR, COLOR_BLACK);
	}
	else
	{
			LED_Start(LED_PAIR, COLOR_BLUE);
	}
	if (ob_app_wireless_pair_fsm.led_display_count > 20)
	{
			ob_app_wireless_pair_fsm.led_display_count = 0;
			LED_Stop(LED_PAIR);
			Process_SetHoldOn(display_led_process, 0);
			Process_Stop(display_led_process);
	}
}

static void app_wireless_pair_start_display_led(void)
{
	ob_app_wireless_pair_fsm.led_display_count = 0;
  Process_Start(500, "display_led_process", display_led_process);
  Process_SetHoldOn(display_led_process, 1);
}

static void app_wireless_pair_stop_display_led(void)
{
	ob_app_wireless_pair_fsm.led_display_count = 0;
	LED_Stop(LED_PAIR);
	Process_SetHoldOn(display_led_process, 0);
	Process_Stop(display_led_process);
}

static void app_wireless_pair_in_process(void)
{
	int	ret = 0;
	uint8_t *connect_addr;
	uint8_t peer_addr[6];																																				//对端mac地址
	ble_gap_addr_t m_addr;																																			//自身mac地址
	char buf[16];
	uint32_t err_code;

	if(ob_app_wireless_pair_fsm.curState == APP_WIRELESS_PAIR_STATE_PAIRING_IN_PROGRESS)
	{
		ob_app_wireless_pair_fsm.is_busy = true;
		
		//获取已连接的对端mac地址
		connect_addr = wireless_pair_get_connect_macaddr();
		//获取自身mac地址
		err_code = sd_ble_gap_addr_get(&m_addr);
		APP_ERROR_CHECK(err_code);
		//获取对端的mac地址
		for(int i=0;i<6;i++)peer_addr[i]=ob_app_wireless_pair_fsm.peer_addr[i];
		
		
		if(mFlash.isHost)																			//左鞋处理逻辑
		{
			//判断是否处于连接且连接的mac地址为配对地址
			if(host_isconnect() == 1 && memcmp(peer_addr,connect_addr,6) == 0)
			{
				//判断是否配对过，若已配对过，直接进入配对结束阶段。若无配对过，则记录MAC地址，清除步数，进入配对结束。
				if(memcmp(peer_addr,mFlash.mClient.macAddr,6) != 0)
				{
					for(int i = 0; i < 6; i++)
					{
						mFlash.mClient.macAddr[i] = peer_addr[i];
						mFlash.macHost[i] 				= m_addr.addr[5-i];
						mBackup.macAddr_L[i] 			= mFlash.macHost[i];         //主机地址
						mBackup.macAddr_R[i] 			= mFlash.mClient.macAddr[i]; //从机地址
					}
					mFlash.mClient.isConfig 		='C';
					mBackup.hardVersion 				= mFlash.mClient.hardVersion;
					mBackup.sotfVersion 				= mFlash.mClient.sotfVersion;
					mBackup.isConfig 						= mFlash.mClient.isConfig;
					if(Flash_SaveBackup() != ZONE_OP_SUCCESS){Except_TxError(EXCEPT_Pair, "pair save backup fail");}
					if(Flash_DeleteAllStep() != ZONE_OP_SUCCESS){Except_TxError(EXCEPT_Pair, "pair clear step fail");}
					memset(&mFlash.mStep, 0, sizeof(FlashStep_t));
					if(Flash_SaveInfomation() != ZONE_OP_SUCCESS){Except_TxError(EXCEPT_Pair, "Flash_SaveInfomation fail");}
				}
				app_wireless_pair_start_led();
				app_wireless_pair_EventHandle(APP_WIRELESS_PAIR_EVENT_PAIR_DONE);
			}
			else
			{
				//若不是，断开连接，设置扫描为新的配对地址
				sprintf(buf,"%02X%02X%02X%02X%02X%02X",m_addr.addr[5],m_addr.addr[4],m_addr.addr[3],peer_addr[3],peer_addr[4],peer_addr[5]);
				if(memcmp(ob_app_wireless_pair_fsm.already_scan_or_adv_mac_buf,buf,strlen(buf)) != 0)
				{
					advertising_stop();
					nrf_ble_scan_stop();
					host_disconnect();
					if(host_isconnect() == 0)
					{
						ret += ob_app_wireless_pair_fsm.set_adv_cb(0x01);
						host_set_scan_name(buf,strlen(buf));
						ret += ob_app_wireless_pair_fsm.set_scan_cb(0x02);
						if(ret == 0)memcpy(ob_app_wireless_pair_fsm.already_scan_or_adv_mac_buf,buf,strlen(buf));
					}
				}
			}
		}
		else																									//右鞋处理逻辑
		{
			//判断是否处于连接且连接的mac地址为配对地址
			if(slave_isconnect() == 1 && memcmp(peer_addr,connect_addr,6) == 0)
			{
				//判断是否配对过，若已配对过，直接进入配对结束阶段。若无配对过，则记录MAC地址，清除步数，进入配对结束。
				if(memcmp(peer_addr,mFlash.mClient.macAddr,6) != 0)
				{
					for(int i = 0; i < 6; i++)
					{
						mFlash.mClient.macAddr[i]	=	peer_addr[i];
						mFlash.macHost[i]					=	m_addr.addr[5-i];
						mBackup.macAddr_L[i] 			= mFlash.macHost[i];         //主机地址
						mBackup.macAddr_R[i] 			= mFlash.mClient.macAddr[i]; //从机地址
					}
					mFlash.mClient.isConfig 		='C';
					mBackup.hardVersion 				= mFlash.mClient.hardVersion;
					mBackup.sotfVersion 				= mFlash.mClient.sotfVersion;
					mBackup.isConfig 						= mFlash.mClient.isConfig;
					if(Flash_SaveBackup() != ZONE_OP_SUCCESS){Except_TxError(EXCEPT_Pair, "pair save backup fail");}
					if(Flash_DeleteAllStep() != ZONE_OP_SUCCESS){Except_TxError(EXCEPT_Pair, "pair clear step fail");}
					memset(&mFlash.mStep, 0, sizeof(FlashStep_t));
					if(Flash_SaveInfomation() != ZONE_OP_SUCCESS){Except_TxError(EXCEPT_Pair, "Flash_SaveInfomation fail");}
				}
				app_wireless_pair_start_led();
				app_wireless_pair_EventHandle(APP_WIRELESS_PAIR_EVENT_PAIR_DONE);
			}
			else
			{
				//若不是，断开连接，设置广播为新的配对地址
				sprintf(buf,"%02X%02X%02X%02X%02X%02X",peer_addr[0],peer_addr[1],peer_addr[2],m_addr.addr[2],m_addr.addr[1],m_addr.addr[0]);
				if(memcmp(ob_app_wireless_pair_fsm.already_scan_or_adv_mac_buf,buf,strlen(buf)) != 0)
				{
					advertising_stop();
					nrf_ble_scan_stop();
					slave_disconnect();
					if(slave_isconnect() == 0)
					{
						ret += ob_app_wireless_pair_fsm.set_scan_cb(0x01);
						slave_set_adv_name(buf,strlen(buf));
						slave_adv_init();
						ret += ob_app_wireless_pair_fsm.set_adv_cb(0x02);
						if(ret == 0)memcpy(ob_app_wireless_pair_fsm.already_scan_or_adv_mac_buf,buf,strlen(buf));
					}
				}
			}
		}
		ob_app_wireless_pair_fsm.is_busy = false;
	}
}

/*API ------------------------------------------------------------------------------------------------------------------------------------*/
/**
	@brief 		初始化无线配对应用
	@param 		无
	@return 	错误代码					- [out]	-1失败，0成功
*/
int	app_wireless_pair_Init(void)
{
	//初始化结构体
//	memset(&ob_app_wireless_pair_fsm,0,sizeof(App_Wireless_Pair_Fsm_s));																													//不能meset初始化，因为回调函数会被清除。
	
	ob_app_wireless_pair_fsm.curState 								= APP_WIRELESS_PAIR_STATE_PAIRING_STANDBY;
	
	ob_app_wireless_pair_fsm.is_busy 									= false;
	
	ob_app_wireless_pair_fsm.led_switch								= 0x01;
	
	//{到来的事件，当前的状态，将要要执行的函数，下一个状态}
	ob_app_wireless_pair_fsm.FsmTable[0].event				=	APP_WIRELESS_PAIR_EVENT_CHARGING_INSERTING;																	//充电插入
	ob_app_wireless_pair_fsm.FsmTable[0].CurState			=	APP_WIRELESS_PAIR_STATE_PAIRING_STANDBY;																		//配对待机状态
	ob_app_wireless_pair_fsm.FsmTable[0].eventActFun	=	app_wireless_pair_set_scan_adv_on;																					//设置扫描和广播开
	ob_app_wireless_pair_fsm.FsmTable[0].NextState		=	APP_WIRELESS_PAIR_STATE_PAIRING_PREPARATION;																//配对准备中状态
	
	ob_app_wireless_pair_fsm.FsmTable[1].event				=	APP_WIRELESS_PAIR_EVENT_CHARGING_UNPLUG;																		//充电拔出
	ob_app_wireless_pair_fsm.FsmTable[1].CurState			=	APP_WIRELESS_PAIR_STATE_PAIRING_PREPARATION;																//配对准备中状态
	ob_app_wireless_pair_fsm.FsmTable[1].eventActFun	=	app_wireless_pair_set_scan_adv_off;																					//设置扫描和广播关
	ob_app_wireless_pair_fsm.FsmTable[1].NextState		=	APP_WIRELESS_PAIR_STATE_PAIRING_STANDBY;																		//配对待机状态
	
	ob_app_wireless_pair_fsm.FsmTable[2].event				=	APP_WIRELESS_PAIR_EVENT_RSSI_MEETS_REQUIREMENTS;														//rssi符合要求
	ob_app_wireless_pair_fsm.FsmTable[2].CurState			=	APP_WIRELESS_PAIR_STATE_PAIRING_PREPARATION;																//配对准备中状态
	ob_app_wireless_pair_fsm.FsmTable[2].eventActFun	=	app_wireless_pair_unconditional_entry;																			//不操作，直接进入下一个状态
	ob_app_wireless_pair_fsm.FsmTable[2].NextState		=	APP_WIRELESS_PAIR_STATE_PAIRING_IN_PROGRESS;																//配对进行中状态
	
	ob_app_wireless_pair_fsm.FsmTable[3].event				=	APP_WIRELESS_PAIR_EVENT_CHARGING_UNPLUG;																		//充电拔出
	ob_app_wireless_pair_fsm.FsmTable[3].CurState			=	APP_WIRELESS_PAIR_STATE_PAIRING_IN_PROGRESS;																//配对进行中状态
	ob_app_wireless_pair_fsm.FsmTable[3].eventActFun	=	app_wireless_pair_set_scan_adv_off;																					//设置扫描和广播关
	ob_app_wireless_pair_fsm.FsmTable[3].NextState		=	APP_WIRELESS_PAIR_STATE_PAIRING_STANDBY;																		//配对待机状态
	
	ob_app_wireless_pair_fsm.FsmTable[4].event				=	APP_WIRELESS_PAIR_EVENT_RSSI_DOES_NOT_MEETS_REQUIREMENTS;										//rssi不符合要求
	ob_app_wireless_pair_fsm.FsmTable[4].CurState			=	APP_WIRELESS_PAIR_STATE_PAIRING_IN_PROGRESS;																//配对进行中状态
	ob_app_wireless_pair_fsm.FsmTable[4].eventActFun	=	app_wireless_pair_unconditional_entry;																			//不操作，直接进入下一个状态
	ob_app_wireless_pair_fsm.FsmTable[4].NextState		=	APP_WIRELESS_PAIR_STATE_PAIRING_PREPARATION;																//配对准备中状态
	
	ob_app_wireless_pair_fsm.FsmTable[5].event				=	APP_WIRELESS_PAIR_EVENT_PAIR_DONE;																					//配对完成					
	ob_app_wireless_pair_fsm.FsmTable[5].CurState			=	APP_WIRELESS_PAIR_STATE_PAIRING_IN_PROGRESS;																//配对进行中状态
	ob_app_wireless_pair_fsm.FsmTable[5].eventActFun	=	app_wireless_pair_unconditional_entry;																			//不操作，直接进入下一个状态
	ob_app_wireless_pair_fsm.FsmTable[5].NextState		=	APP_WIRELESS_PAIR_STATE_END_OF_PAIRING;																			//配对结束状态
	
	ob_app_wireless_pair_fsm.FsmTable[6].event				=	APP_WIRELESS_PAIR_EVENT_CHARGING_UNPLUG;																		//充电拔出	
	ob_app_wireless_pair_fsm.FsmTable[6].CurState			=	APP_WIRELESS_PAIR_STATE_END_OF_PAIRING;																			//配对结束状态
	ob_app_wireless_pair_fsm.FsmTable[6].eventActFun	=	app_wireless_pair_set_scan_adv_off;																					//设置扫描和广播关
	ob_app_wireless_pair_fsm.FsmTable[6].NextState		=	APP_WIRELESS_PAIR_STATE_PAIRING_STANDBY;																		//配对待机状态
	
	ob_app_wireless_pair_fsm.FsmTable[7].event				=	APP_WIRELESS_PAIR_EVENT_RSSI_DOES_NOT_MEETS_REQUIREMENTS;										//rssi不符合要求
	ob_app_wireless_pair_fsm.FsmTable[7].CurState			=	APP_WIRELESS_PAIR_STATE_END_OF_PAIRING;																			//配对结束状态
	ob_app_wireless_pair_fsm.FsmTable[7].eventActFun	=	app_wireless_pair_unconditional_entry;																			//不操作，直接进入下一个状态
	ob_app_wireless_pair_fsm.FsmTable[7].NextState		=	APP_WIRELESS_PAIR_STATE_PAIRING_PREPARATION;																//配对准备中状态
	
	Process_Start(0,"app_wireless_pair_in_process",app_wireless_pair_in_process);
	
	return 0;
}

/**
	@brief 		无线配对注册扫描设置
	@param 		cb								-	[in]	注册的回调
	@return 	错误代码					- [out]	-1失败，0成功
*/
int	app_wireless_pair_Regist_SetScan(App_Wireless_Pair_Set_Scan_Cb cb)
{
	if(cb != NULL)
	{
		ob_app_wireless_pair_fsm.set_scan_cb = cb;
		return 0;
	}
	return -1;
}

/**
	@brief 		无线配对注册广播设置
	@param 		cb								-	[in]	注册的回调
	@return 	错误代码					- [out]	-1失败，0成功
*/
int	app_wireless_pair_Regist_SetAdv(App_Wireless_Pair_Set_Adv_Cb cb)
{
	if(cb != NULL)
	{
		ob_app_wireless_pair_fsm.set_adv_cb = cb;
		return 0;
	}
	return -1;
}

/**
	@brief 		无线配对扫描请求
	@param 		rssi							-	[in]	天线信号强度
	@param 		addr							-	[in]	MAC地址缓冲区指针
	@return 	错误代码					- [out]	-1失败，0成功
*/
int	app_wireless_pair_Scan_Req(int rssi, uint8_t *addr)
{
	int ret = 0;
	
	if(mFlash.isHost)
	{
		app_wireless_pair_enter_in_process(rssi,addr);
	}
	else
	{
		ret = -1;					//只有左鞋收到右鞋的扫描请求才对
	}
	
	return ret;
}

/**
	@brief 		无线配对扫描回复
	@param 		rssi							-	[in]	天线信号强度
	@param 		addr							-	[in]	MAC地址缓冲区指针
	@return 	错误代码					- [out]	-1失败，0成功
*/
int	app_wireless_pair_Scan_Rsp(int rssi, uint8_t *addr)
{
	int ret = 0;
	
	if(!mFlash.isHost)
	{
		app_wireless_pair_enter_in_process(rssi,addr);
	}
	else
	{
		ret = -1;					//只有右鞋收到左鞋的扫描回应才对
	}
	
	return ret;
}

/**
	@brief 		无线配对亮灯
	@param 		无
	@return 	错误代码					- [out]	-1失败，0成功
*/
int	app_wireless_pair_start_led(void)
{
//	SEGGER_RTT_printf(0,"start: curState:%d\r\n",ob_app_wireless_pair_fsm.curState);
	if(ob_app_wireless_pair_fsm.led_switch != 0 && (ob_app_wireless_pair_fsm.curState == APP_WIRELESS_PAIR_STATE_PAIRING_IN_PROGRESS))
	{
		ob_app_wireless_pair_fsm.led_switch--;
		app_wireless_pair_start_display_led();
//		SEGGER_RTT_printf(0,"app_wireless_pair_start_display_led\r\n");
	}
	return 0;
}

/**
	@brief 		无线配对灭灯
	@param 		无
	@return 	错误代码					- [out]	-1失败，0成功
*/
int	app_wireless_pair_stop_led(void)
{
//	SEGGER_RTT_printf(0,"stop: curState:%d\r\n",ob_app_wireless_pair_fsm.curState);
	app_wireless_pair_stop_display_led();
	ob_app_wireless_pair_fsm.led_switch = 1;
	app_wireless_pair_EventHandle(APP_WIRELESS_PAIR_EVENT_RSSI_DOES_NOT_MEETS_REQUIREMENTS);
//	SEGGER_RTT_printf(0,"app_wireless_pair_stop_display_led\r\n");
	return 0;
}

/**
	@brief 		无线配对事件处理
	@param 		event							-	[in]	事件
	@return 	错误代码					- [out]	-1失败，0成功
*/
int	app_wireless_pair_EventHandle(App_Wireless_Pair_Event_e  event)
{
	int (*eventActFun)() = NULL;  	//函数指针初始化为空
	App_Wireless_Pair_State_e NextState;
	int flag = 0; 									//标识是否满足条件
	int i;
	int ret = 0;
	
	
	/*获取当前动作函数*/
	for (i = 0; i<APP_WIRELESS_PAIR_FSMTABLE_LEN; i++)
	{
			//当且仅当当前状态下来个指定的事件，我才执行它
			if (event == ob_app_wireless_pair_fsm.FsmTable[i].event && ob_app_wireless_pair_fsm.curState == ob_app_wireless_pair_fsm.FsmTable[i].CurState)
			{
					flag = 1;
					eventActFun = ob_app_wireless_pair_fsm.FsmTable[i].eventActFun;
					NextState = ob_app_wireless_pair_fsm.FsmTable[i].NextState;
					break;
			}
	}
	
	if (flag) //如果满足条件了
	{
		/*动作执行*/
		if(eventActFun)
		{
			ret = eventActFun();
		}

		//跳转到下一个状态
		if(ret == 0)
		{
			ob_app_wireless_pair_fsm.curState = NextState;
		}
	}
	else
	{
		//there is no match
		ret = -1;
	}
	
	return ret;
}