shoes/liangjianbo/nRF5_SDK_17.0.0_9d13099/components/boards/pca10112.h

/**
 * Copyright (c) 2020, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
#ifndef PCA10112_H
#define PCA10112_H

#ifdef __cplusplus
extern "C" {
#endif

#include "nrf_gpio.h"

// LEDs definitions for PCA10112
#define LEDS_NUMBER    4

#define LED_1          NRF_GPIO_PIN_MAP(0,13)
#define LED_2          NRF_GPIO_PIN_MAP(0,14)
#define LED_3          NRF_GPIO_PIN_MAP(0,15)
#define LED_4          NRF_GPIO_PIN_MAP(0,16)
#define LED_START      LED_1
#define LED_STOP       LED_4

#define LEDS_ACTIVE_STATE 0

#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }

#define LEDS_INV_MASK  LEDS_MASK

#define BSP_LED_0      NRF_GPIO_PIN_MAP(0,13)
#define BSP_LED_1      NRF_GPIO_PIN_MAP(0,14)
#define BSP_LED_2      NRF_GPIO_PIN_MAP(0,15)
#define BSP_LED_3      NRF_GPIO_PIN_MAP(0,16)

#define BUTTONS_NUMBER 4

#define BUTTON_1       NRF_GPIO_PIN_MAP(0,11)
#define BUTTON_2       NRF_GPIO_PIN_MAP(0,12)
#define BUTTON_3       NRF_GPIO_PIN_MAP(0,24)
#define BUTTON_4       NRF_GPIO_PIN_MAP(0,25)
#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP

#define BUTTONS_ACTIVE_STATE 0

#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }

#define BSP_BUTTON_0   BUTTON_1
#define BSP_BUTTON_1   BUTTON_2
#define BSP_BUTTON_2   BUTTON_3
#define BSP_BUTTON_3   BUTTON_4

#define RX_PIN_NUMBER  NRF_GPIO_PIN_MAP(0,8)
#define TX_PIN_NUMBER  NRF_GPIO_PIN_MAP(0,6)
#define CTS_PIN_NUMBER NRF_GPIO_PIN_MAP(0,7)
#define RTS_PIN_NUMBER NRF_GPIO_PIN_MAP(0,5)
#define HWFC           true

#define NRF21540_RXEN_PIN   NRF_GPIO_PIN_MAP(0,19)
#define NRF21540_TXEN_PIN   NRF_GPIO_PIN_MAP(0,22)
#define NRF21540_PDN_PIN    NRF_GPIO_PIN_MAP(0,23)
#define NRF21540_MODE_PIN   NRF_GPIO_PIN_MAP(0,17)
#define NRF21540_ANTSEL_PIN NRF_GPIO_PIN_MAP(0,20)
#define NRF21540_CS_PIN     NRF_GPIO_PIN_MAP(0,21)
#define NRF21540_MOSI_PIN   NRF_GPIO_PIN_MAP(1,13)
#define NRF21540_MISO_PIN   NRF_GPIO_PIN_MAP(1,14)
#define NRF21540_CLK_PIN    NRF_GPIO_PIN_MAP(1,15)



// serialization APPLICATION board - temp. setup for running serialized MEMU tests
#define SER_APP_CTS_PIN             NRF_GPIO_PIN_MAP(0,2)     // UART Clear To Send pin number.

#define SER_APP_SPIM0_SCK_PIN       NRF_GPIO_PIN_MAP(0,27)     // SPI clock GPIO pin number.
#define SER_APP_SPIM0_MOSI_PIN      NRF_GPIO_PIN_MAP(0,2)      // SPI Master Out Slave In GPIO pin number
#define SER_APP_SPIM0_MISO_PIN      NRF_GPIO_PIN_MAP(0,26)     // SPI Master In Slave Out GPIO pin number

// serialization CONNECTIVITY board
#define SER_CON_RTS_PIN             NRF_GPIO_PIN_MAP(0,2)     // UART Request To Send pin number. Not used if HWFC is set to false.


#define SER_CON_SPIS_SCK_PIN        NRF_GPIO_PIN_MAP(0,27)    // SPI SCK signal.
#define SER_CON_SPIS_MOSI_PIN       NRF_GPIO_PIN_MAP(0,2)     // SPI MOSI signal.
#define SER_CON_SPIS_MISO_PIN       NRF_GPIO_PIN_MAP(0,26)    // SPI MISO signal.

#define SER_CONN_CHIP_RESET_PIN     NRF_GPIO_PIN_MAP(1,1)    // Pin used to reset connectivity chip

// Arduino board mappings
#define ARDUINO_SCL_PIN             NRF_GPIO_PIN_MAP(0, 27) // SCL signal pin
#define ARDUINO_SDA_PIN             NRF_GPIO_PIN_MAP(0, 26) // SDA signal pin
#define ARDUINO_AREF_PIN            NRF_GPIO_PIN_MAP(0, 2 ) // Aref pin

#define ARDUINO_13_PIN              NRF_GPIO_PIN_MAP(1, 15)  // Digital pin 13
#define ARDUINO_12_PIN              NRF_GPIO_PIN_MAP(1, 14)  // Digital pin 12
#define ARDUINO_11_PIN              NRF_GPIO_PIN_MAP(1, 13)  // Digital pin 11
#define ARDUINO_10_PIN              NRF_GPIO_PIN_MAP(1, 12)  // Digital pin 10
#define ARDUINO_9_PIN               NRF_GPIO_PIN_MAP(1, 11)  // Digital pin 9
#define ARDUINO_8_PIN               NRF_GPIO_PIN_MAP(1, 10)  // Digital pin 8

#define ARDUINO_7_PIN               NRF_GPIO_PIN_MAP(1, 8) // Digital pin 7
#define ARDUINO_6_PIN               NRF_GPIO_PIN_MAP(1, 7) // Digital pin 6
#define ARDUINO_5_PIN               NRF_GPIO_PIN_MAP(1, 6) // Digital pin 5
#define ARDUINO_4_PIN               NRF_GPIO_PIN_MAP(1, 5) // Digital pin 4
#define ARDUINO_3_PIN               NRF_GPIO_PIN_MAP(1, 4) // Digital pin 3
#define ARDUINO_2_PIN               NRF_GPIO_PIN_MAP(1, 3) // Digital pin 2
#define ARDUINO_1_PIN               NRF_GPIO_PIN_MAP(1, 2) // Digital pin 1
#define ARDUINO_0_PIN               NRF_GPIO_PIN_MAP(1, 1) // Digital pin 0

#define ARDUINO_A0_PIN              NRF_GPIO_PIN_MAP(0, 3 ) // Analog channel 0
#define ARDUINO_A1_PIN              NRF_GPIO_PIN_MAP(0, 4 ) // Analog channel 1
#define ARDUINO_A2_PIN              NRF_GPIO_PIN_MAP(0, 28) // Analog channel 2
#define ARDUINO_A3_PIN              NRF_GPIO_PIN_MAP(0, 29) // Analog channel 3
#define ARDUINO_A4_PIN              NRF_GPIO_PIN_MAP(0, 30) // Analog channel 4
#define ARDUINO_A5_PIN              NRF_GPIO_PIN_MAP(0, 31) // Analog channel 5


#ifdef __cplusplus
}
#endif

#endif // PCA10112_H